HP Scitex Caldera RIP

The HP Scitex Caldera RIP is sold with the HP Scitex LX800/LX600 Printer. After the RIP software has been installed and the printer has been added to the RIP, use the following procedure to configure the RIP.

1.Go to the 'Special menu' in the RIP and click on 'Server Admin'.

2.Click on 'Configure' and select the 'Connection' tab, the following screen is displayed. Enter the IP address of the printer (not the IP address of the IPS).

Install the covers

Manpower

Tools

Time

 

 

 

1 person

T30 screwdriver

5 minutes

 

 

 

66 Chapter 9 Prepare for printing

ENWW

Page 70
Image 70
HP Scitex LX800 Industrial manual Install the covers, HP Scitex Caldera RIP