HP Scitex LX800 Industrial Protective Earth conductors grounding, Protective Earth attachment

Protective Earth conductors (grounding)

The printer must be connected to a good quality, dedicated ground line in order to avoid electrical risk. Please note your obligation to comply with the Electrical Code requirements of the local jurisdiction of the country where the equipment is installed.

Protective Earth attachment

▲The ground wires coming from the tri-phase power cord and from the single-phase power cord must be fitted with round terminals suitable for attaching into M6 pillar terminal. Reliable screw attachment must be used. They are close to Protective Earth (PE) terminal marking which are located in the Cabinet on the right as shown on the picture below.

Protective Earth (PE) terminal markings:

26 Chapter 5 Connect the power cables ENWW