HP Scitex LX800 Industrial manual Introduction, Installation guide overview, Manpower required

2 Introduction

Installation guide overview

This installation guide provides you with step by step procedures for the installation process. This guide is organized in chronological order and should be followed from beginning to end.

Manpower required

Installation of your HP Designjet L65500 & HP Scitex LX600/LX800 requires the following manpower:

●HP Installation Specialist

●Customer

●Certified electrician

●Moving specialist

Tools required for installation

TIP: Without a heavy-duty electric screwdriver, it could take up to two hours just to disassemble the crate.

Installation of your HP Designjet L65500 HP Scitex LX600/LX800 requires the following tools:

●Step ladder

●Cutting pliers

●Cutter

●Heavy-duty electric screwdriver with two batteries

●Phillips screwdrivers

●T8, T10, T15, T20, T25 and T30 torx screwdrivers

●Long torx extension pins that have a diameter of approximately 2–3 mm and are more than 15 cm in length to be able to access all screws

●Two Flathead screwdrivers (two sizes)

●Socket wrench, extension and 17 mm socket

●7 mm, 15 mm and two 30 mm open-end wrenches

6 Chapter 2 Introduction ENWW