2.You can also use skates to maneuver the crate around tight corners or to move the crate laterally.
Move the printer over ramps
WARNING! Do not exceed the maximum incline if you must move the printer up or down a ramp. Failure to respect the maximum incline could damage the printer.
CAUTION: Slopes steeper than 5% may cause serious damage to the printer.
Once the crate packaging has been removed from the printer, the maximum incline of a ramp used to move the printer is 5%.
If you must move the printer over a ramp that exceeds the maximum incline (5%), do not remove the printer from the pallet. The pallet will help prevent damage to the printer.
Remove the crate packaging
Manpower | Tools | Time |
|
|
|
2 persons | M17 socket wrench, Phillips screwdriver, | 40 minutes |
| pliers, ladder |
|
|
|
|
NOTE: Approximately 16 bolts and 100 Phillips screws secure the crate.
In some cases, it may be necessary to leave the printer inside the crate packaging to go up ramps or make second story deliveries. Plan accordingly.
1.Beginning with the top, left corners, remove the Phillips screws securing the top panels and remove them.
10 Chapter 3 Receive the shipment | ENWW |
