Label | Explanation |
|
|
| Electric shock hazard. The printer has two mains supplies. |
| There are no |
| case of operation of the fuse, parts of the printer that remain |
| energized may represent a hazard during servicing. Refer |
| servicing to qualified service personnel. Turn off the printer |
| using both Branch Circuit Breakers located in the building's |
| Power Distribution Unit (PDU) before servicing. See |
| installation instructions before connecting to the supply. |
|
|
| Danger of electric shock. In case of operation of the fuse, parts |
| of the printer that remain energized may represent a hazard |
| during servicing. Therefore, ensure that the printer is |
| completely turned off before servicing. |
Risk of burns. Do not touch the internal enclosures of the printer's drying and curing modules.
You are recommended to wear gloves when handling ink cartridges, printhead cleaning cartridges and the printhead cleaning container.
When substrate has been loaded, the carriage descends into its normal position, and could crush your hand or anything else left underneath it.
Danger that your hands may become trapped between gearwheels
When the printer is printing, the printhead carriage travels back and forth across the substrate.
Beware of this moving part.
4 Chapter 1 Safety precautions | ENWW |
