NOTE: The covers are wrapped in plastic, and the screws are inside the packaging. It is recommended to install the covers last, in case of any issue that may require you to remove the covers. It is recommended to wear gloves when removing the covers.
1.On the left side, replace the six T30 screws that secure each cover. The position of the screws is the same on the rear cover as it is on the front cover.
2.On the right side, replace the four T30 screws that secure the rear cover.
3.On the right side, replace the four T30 screws that secure the sliding door, starting at the top.
ENWW | Install the covers 67 |
