HP Scitex LX800 Industrial manual Ink Supply Legend

Models: Scitex LX800 Industrial

1 86
Download 86 pages 33.97 Kb
Page 44
Image 44

Ink Supply Legend

1 = K

2 = Y

3 = C

4 = M

5 = LM

6 = LC

CAUTION: Do not push the ink from the syringe if the electrovalves are not open. You will notice too much resistance if the electrovalves are not open.

TIP: If you run out of ink in the syringe, you can refill the syringe from the ink cartridge. Keep track of how much ink you remove from the ink cartridge, because you will be asked to report the quantity of ink taken. Make sure the electrovalves are still open.

15.Remove the syringe from the purge port with a cloth around the needle to prevent spills.

16.Press OK on the front panel to close the electrovalves.

17.Check that the ink has arrived as far as the purging bag and purger.

18.Press OK to confirm that you have finished purging the ink tubes for the color selected.

19.Disconnect the purge bag and connect the ink cartridge. If the ink cartridge is connected correctly, the cartridge LED will show a constant green light.

40 Chapter 7 Purge the ink system

ENWW

Page 44
Image 44
HP Scitex LX800 Industrial manual Ink Supply Legend