NOTE: A blown fuse may indicate malfunctioning electrical circuits within the system. Call your service representative, and do not attempt to replace the fuse yourself.
Heat hazard
The drying and curing subsystems of the printer operate at high temperatures and can cause burns if touched. To avoid personal injury, take the following precautions.
●Do not touch the internal enclosures of the printer's drying and curing modules.
●Take special care when accessing the substrate path.
Fire hazard
The drying and curing subsystems of the printer operate at high temperatures. Call your service representative if the printer's
To avoid the risk of fire, take the following precautions.
●Do not insert objects through slots in the printer.
●Take care not to spill liquid on the printer.
●Do not use aerosol products that contain flammable gases inside or around the printer.
●Do not block or cover the openings of the printer.
●Do not attempt to dismantle the drying or curing module, or the electrical control cabinet.
●Load substrates that can be used at an operating temperature of up to 125°C (257°F), and have
Mechanical hazard
The printer has moving parts that can cause injury. To avoid personal injury, take the following precautions when working close to the printer.
●Keep your clothing and all parts of your body away from the printer's moving parts.
●Avoid wearing necklaces, bracelets and other hanging objects.
●If your hair is long, try to secure it so that it will not fall into the printer.
●Take care that sleeves or gloves do not get caught in the printer's moving parts.
●Avoid standing close to the fans, which could cause injury and could also affect print quality (by obstructing the air flow).
●Do not touch gears or moving rolls during printing.
2 Chapter 1 Safety precautions | ENWW |
