Technical specification
All measurements are with 230V/50Hz mains power
Continuous output power
All channels driven, | 135W per channel; 945W total |
All channels driven, | 210W per channel; 1.47kW total |
One or two channels driven at 1kHz, 8Ω | 190W per channel |
One or two channels driven at 1kHz, 4Ω | 305W per channel |
One or two channels driven at 1kHz, 3.2Ω | 325W per channel |
Peak output current capability |
|
| ±20.5A per channel |
Total harmonic distortion |
|
At any level up to rated power, into 4 or 8Ω | <0.08% maximum |
| <0.007% at 1kHz |
Frequency response |
|
| ±0.2dB |
| |
Residual hum and noise |
|
Ref. full power | |
Voltage gain |
|
| User selectable: |
| A: x31.5dB |
| B: x29dB |
| C: x26dB |
Input impedance |
|
| 22kΩ in parallel with 180pF |
Output impedance |
|
| 20mΩ at 20Hz, 1kHz |
| 80mΩ at 20kHz |
Power requirements |
|
| 115V or 230VAC, 50/60Hz, 2.2kW maximum via IEC |
| mains inlet. |
| A |
| ‘transformer’ |
Physical |
|
| Dimensions: W430 x D400 x H133 mm |
| Mass: 18kg (40 lb) net; 21kg (46 lb) packed |
E&OE
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.
All specification values are typical unless otherwise stated.
Radio interference
The P1000 is an audio device which has been designed to very high standards of electromagnetic compatibility.
The unit can radiate RF (radio frequency) energy. In some cases this can cause interference with FM and AM radio reception. If this is the case, keep the P1000 and its connecting cables as far from the tuner and its aerials as possible. Connecting the P1000 and the tuner to different mains sockets can also help to reduce interference.
EC Countries – These products have been designed to comply with directive 89/336/EEC. USA – These products comply with FCC requirements.
English
P1000