3.Remove the eight T20 screws attaching the scan path assembly to the frame. Use a screwdriver extension for easier screw access.

WARNING! Failure to remove the screws attaching the scan path assembly to the frame could seriously damage the printer.

NOTE: The screws located at the back, are less accessible and may require a longer screwdriver.

4.Remove tape from the window and open the carriage access door, remove the T30 screw securing the carriage.

18 Chapter 4 Set up the printer in the final position

ENWW

Page 22
Image 22
HP Scitex LX800 Industrial manual Enww