Installing Software
Before you connect the USB cable to the recorder and your PC, you must first install the software.
Be sure to confirm the following before installation:
•Exit all running applications.
•Eject the floppy disk if you are using one.
•If you are running Windows 2000 /XP (Professional only) on a network, you need to log on as an administrator.
Installing Software
Windows
1 Insert Olympus DSS Player into the CD-ROM drive.
The installation program will start automatically. Once the program starts, jump to step 4. If it does not, follow the procedures in steps 2 and 3.
2 Click on the [Start] button and select [Run].
3 Enter “D:/Setup.exe” in the [Open] field and click on [OK].
This is assuming the
D.
4 The installation Language Selection dialog box opens.
Click on the desired language to select it.
5 Click on [Next] when the DSS Player opening screen appears.
6 Confirm your acceptance of the terms of the Licensing Agreement.
You must accept the terms of the Licensing Agreement to install DSS Player. If you accept them, click on [Yes].
7 Register user information. Register user information. Enter your name, company name, and license ID number (serial number).
The license ID number is printed on the license ID card. Click on [Next]. A confirmation dialog box opens, click on [Yes].
8 Select where to install DSS Player. This lets you specify the folder in which to install DSS Player. Click on [Browse] to find the desired installation folder. To accept the default folder, click on [Next].
Note
If the installation folder does not exist, a confirmation dialog box opens to get your permission to create a folder for this purpose. Click on [Yes].
44
