Olympus DS-333 manual Running DSS Player, Start Windows Connect the recorder to your PC

Running DSS Player

Running DSS Player

Windows			3
1 Start Windows.
2	Connect the recorder to your PC.
	For the connection procedure, refer to
	“Connecting to Your PC”. (☞ P.50)
	When you connect the recorder to your
	PC for the first time, the USB Driver Setup
	Wizard will open. Follow the instructions
	on the screen to install the driver.
3	Click on the [Start] button, select
	[Programs], then [Olympus DSS
	Player 2002].
	(in Windows XP, click on the [Start] button,	3	4
	select [All Programs], then [Olympus DSS
	Player 2002].)

4 Click on [Olympus DSS Player

2002].

About automatic startup

By connecting the recorder to your PC, you can automatically start an application.

1Right-click on icon of the Task Bar on the lower right-hand corner on the screen, then click on Select startup application.

2Check the application to automatically start.

The application that you check will automatically start. If you do not want it to automatically

start, uncheck the application.

·······················································································································································

Notes

•You will not be able to run the included DSS Player 2002 and DSS Player 3.0/3.1/3.5 for DS-150/320 at the same time.

•If you connect the recorder before installing DSS Player, the “Add New Hardware Wizard” dialog box will open.

52 If this happens, click on [Cancel] to exit the wizard, then install DSS Player.