8 |
|
|
|
|
|
Function | Command | Range | Read/Write | Remarks | |
Version | (vr?) | none | read only |
| |
Reset | (rx) | none | write only | 1 second | |
Channel On | (#on) | write only |
| ||
Channel Off | (#of) | write only | Note 3 | ||
Mute | (#mu) | write only |
| ||
(#um) | write only | Note 3 | |||
Mute All | (amu) | none | write only |
| |
(aum) | none | write only |
| ||
Volume Request | (#vl?) | read only |
| ||
Volume Set | (#vl$$) | write only |
| ||
Volume All | (avl$$) | write only |
| ||
Input Request | (#sl?) | read only |
| ||
Input Set | (#sl$) | write only |
| ||
Input Select All | (asl$) | write only |
| ||
All Channels On | (aon) | none | write only |
| |
All Channels Vol up | (avlu) | none | write only | Note 1 | |
All Channels Vol dn | (avld) | none | write only | Note 1 | |
Channel Vol up | (#vlu) | write only | Note 1 | ||
Channel Vol down | (#vld) | write only | Note 1 | ||
Bass adjustment | (#b$) | write only | Note 2 | ||
Treble adjustment | (#t$) | write only | Note 2 | ||
Display treble | (#b?) | read | only |
| |
Display bass | (#t?) | read | only |
|
Note1: Volume up or down requests increase or decrease volume level by 5
Note 2: Treble and bass commands use hexadecimal values
Note3: After “Channels Off (#of)” command an
Also, it is best to leave about a ½ second between commands, as some commands may be missed if they are entered too quickly.
All commands also send a message back to the terminal after they have been completed, so that it is easy to keep track of the previous commands that were sent.
Note: Some commands are read or write only and some are both – for example: Mute All is a write only command and Version is a read only command.
Supported Command Messages
Function | Command | Message |
Version | (vr?) | Version Number |
Reset | (rx) | “Resetting...” |
Channel On | (#on) | “Zone # on” |
Channel Off | (#of) | “Zone # off“ |
Mute | (#mu) | “Zone # muted” |
(#um) | “Zone # unmuted” | |
Mute All | (amu) | "All channels muted" |
(aum) | "All channels | |
Volume Request | (#vl?) | "Zone # volume level = $$" |
Volume Set | (#vl$$) | "Zone # volume level set" |
Volume All | (avl$$) | "All volume levels successfully changed" |
Input Set | (#sl$) | "Zone # input set" |
Input Request | (#sl?) | "Zone # is currently using input channel $” |
Input Select All | (asl$) | "All zones set to source $" |
All Channels On | (aon) | “All zones turned on” |