Kobe Range Hoods CH0130SQB (30"), CH0136SQB (36") Safety Warning, Wiring to Power Supply

2. Align hood-mounting bracket to the two screws	WALL
on the wall and hook hood into place. Tighten
screws to secure hood to the wall.

3. For safety purpose, extra knockout holes on the back of the hood are provided for a more secure installation. Knock out as many holes as needed and secure with screws (not provided) from the inside of hood.

CAUTION: MAKE SURE HOOD IS SECURE

BEFORE RELEASING.

Figure 13

Wiring to Power Supply

SAFETY WARNING

TO PREVENT THE RISK OF ELECTRICAL SHOCK

OR INJURY, THIS RANGE HOOD SHOULD BE

PROPERLY GROUNDED AND INSTALLED BY A

TRAINED PROFESSIONAL WHO IS

KNOWLEDGEABLE ABOUT APPLICABLE

NATIONAL AND LOCAL ELECTRICAL CODES.

BEFORE CONNECTING WIRES, SWITCH POWER

OFF AT SERVICE PANEL TO PREVENT POWER

FROM BEING SWITCHED ON ACCIDENTALLY.

4. Connect the electrical wires.

Figure 14

- Connect three wires (black, white and green) to house wires and cap with wire connectors. Connect according to color: black to black, white to white, and green to green as shown in Figure 14.

- Prevent wires from slipping between motor and any moving parts by securing in electrical box.

10