Kobe Range Hoods CH9642SQB, CH9648SQB, CH9630SQB, CH9636SQB Accessories, Final Assembly

Accessories

9.Drop oil tunnel into recess support near rear of hood. Refer to Figure 6.

10.Install baffle filters and stainless spacer(s). Refer to Measurements and Diagrams on page 22 for baffle filter and stainless spacer placement. Angle baffle filter toward back of hood ￿. Push baffle filter up until almost level ￿. Slide forward into recess behind the front of hood ￿. Lower baffle filter ￿. Slide back until it fits into resting position ￿. Refer to Figure 7.

11.Repeat step 10 to install all baffle filters and stainless spacer(s).

Final Assembly

12.Turn power ON in control panel. Check all light and fan operation.

13.Make sure to leave this manual for the homeowner.

Figure 7

	1
	2
4	3
	5

8