1.Using references in TABLE 1 and Measurements and Diagrams on pages
2.Puncture the knockout wire access hole at the back of the hood and draw the electrical wires through as shown in Figure 12.
3.Align
4.For safety purpose,
mounting holes as needed to secure from the inside of hood (screws not provided).
CAUTION: MAKE SURE HOOD IS SECURE BEFORE RELEASING.
Wiring to Power Supply
SAFETY WARNING
RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY QUALIFIED ELECTRICIAN IN ACCORDANCE WITH ALL
APPLICABLE NATIONAL AND LOCAL
ELECTRICAL CODES.BEFORE CONNECTING WIRES, SWITCH POWER OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY.
5.Connect the electrical wires.
-Connect three wires (black, white and green) to house wires and cap with wire connectors. Connect according to color: black to black, white to white, and green to green as shown on Figure 14.
-Store wires in the wiring box.
Figure 12
Figure 13
WALL |
Figure 14
10