- For Insert Installation -

Figure 1

Preparation Before Installation

NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT

DEBRIS FROM ENTERING THE VENT OPENING.

•Decide the location of the venting pipe from the hood to the outside. Refer to Figure 1.

•A straight, short vent run will allow the hood to perform more efficiently.

•Try to avoid as many transitions, elbows, and long run as possible. This may reduce the performance of the hood.

•Temporarily wire the hood to test for proper operation before installing.

• Important: Peel protective film off the hood, if any.

Figure 2

• Use duct tape to seal joints between pipe sections.

 

 

 

 

CAUTION: If moving the cooking range is

 

 

necessary to install the hood, turn off the power in

 

 

an electric range at the main electrical box. SHUT

 

 

OFF THE GAS BEFORE MOVING A GAS RANGE.

 

 

And use a protective covering to protect cooktop

 

 

and/or countertop from damage.

 

 

Custom Hood Preparation

1.The custom hood frame must be desgined according to the shape and the weight of the insert. Refer to

Measurements and Diagrams on Page 15.

Figure 3

2.Install the Exhaust Plate using 4 screws. Refer to Figure 2.

3.It must have a sturdy base (3/4 inch thick plywood recommended) to sustain the weight of insert.

4.If an optional liner will be installed, the side of the wood frame must be sturdy (3/4 inch thick plywood recommended).

5.It is recommended to install rear & front stud support (not included). Refer to Figure 3. The rear and front stud support is located 1-1/2” up from the base of the wood frame. For safety purposes, extra installation holes on the side of the insert are provided. Prepare the side stud support if needed.

Liner Installation

6.The custom wood frame must have a sturdy base to accommodate the cut-out for the inset. The base must be recessed to accommodate the height of the liner (See liner dimension on Page 16)

7.Secure the liner to the bottom of the base using screws (not included) appropriate for the size and material of your wood frame.

6

Page 8 Page 10
Page 9
Image 9
Kobe Range Hoods IN2636SQB-1 Preparation Before Installation, Custom Hood Preparation, Liner Installation
Page 8 Page 10

IN2636SQB-1 specifications

The Kobe Range Hood IN2636SQB-1 stands out as an exceptional appliance designed for modern kitchens, combining form, function, and advanced technology. This range hood is tailored for those who seek a blend of efficiency, style, and durability, making it a sought-after choice for both professional chefs and home cooking enthusiasts.

One of the primary features of the IN2636SQB-1 is its powerful yet quiet operation. Equipped with a high-performance internal blower, this range hood operates at a maximum airflow of 600 CFM, effectively removing smoke, odors, and grease particles from the air while maintaining an unobtrusive noise level. This balance ensures that conversations can flow smoothly even while the hood is in operation.

The IN2636SQB-1 employs stainless steel construction, which not only adds a sleek and modern aesthetic to any kitchen but also promises longevity and easy maintenance. The surface is resistant to stains and corrosion, allowing for effortless cleaning and providing a robust solution to kitchen management.

An important characteristic of this range hood is its multi-speed control setting. Users can easily adjust the fan speed to match the cooking needs, whether frying, boiling, or simply simmering. This flexibility is crucial for optimizing performance and energy efficiency while also ensuring comfort in the kitchen.

Additionally, the Kobe Range Hood comes equipped with bright LED lights that illuminate the cooking area. This feature enhances visibility and safety while preparing meals, highlighting ingredients and ensuring precision in cooking. The lights also have a long lifespan, which contributes to lower maintenance and replacement costs.

Furthermore, the IN2636SQB-1 includes baffle filters that are designed for superior grease capture. These filters are dishwasher-safe, making cleanup a breeze while ensuring that the unit operates at peak performance.

Installation options are versatile, as this model is designed for both ducted and ductless options, accommodating various kitchen layouts. The IN2636SQB-1 is also compatible with a carbon filter kit for ductless installations, making it adaptable to any home setting.

In summary, the Kobe Range Hood IN2636SQB-1 offers a compelling package of high performance, elegant design, and thoughtful features, making it a fantastic addition to any kitchen. Its powerful ventilation, easy maintenance, and modern aesthetics make it an industry leader in range hoods. Both practical and stylish, it exemplifies what today's homeowners seek in kitchen appliances.
Top Page Image Contents