To Replace Light Bulb
CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.
NOTE: DO NOT TOUCH HALOGEN LIGHT WITH BARE HANDS, WHICH MIGHT CAUSE OVER HEAT AND SHORTEN THE LIFT OF LIGHT BULBS.
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.Make sure all controls are OFF, and range hood is unplugged.
2.Place the
3.Gently separate glass covering from the housing .
4.Gently pull out the defective light bulb and discard. Light bulbs should be 12V 20W maximum.
5.Wear a glove or use a cloth to hold the new light bulb and push securely into light socket. NOTE: DO NOT PUSH TOO HARD OR YOU MAY BREAK THE BULB CONNECTOR.
6.Put back halogen light glass cover .
7.Plug back power cord and turn on range hood to test for operation.
11
