OPERATION INSTRUCTIONS

This KOBE hood is equipped with four electronic controls with a 10-second standby sta second delay shutoff, one powerful centrifugal squirrel with baffle or aluminum filters, volt 20-watt halogen lights.

The four electronic controls are Light Control, Speed Control A, Speed Control B and the (On/Off). Refer to Figure 11.

Figure 11

Light Control

Power Control

Speed Control A

Control

 

 

TURN ON:

Press Power Control (On/Off) button once.

(Note: If any control button is not pressed within 10 seconds, power will be auto turned off).

The KOBE hood will start on Low speed. Each press of the Speed Control button wil cycle through the various speeds.

Press Speed Control A button to cycle from Low, Medium, High, or QuietMode. Press Speed Control B button to cycle from Low, QuietMode, High or Medium.

(Note: Speed Control A or B will operate both fans.)

Press Light Control button to turn on halogen light.

TURN OFF:

Press Power Control (On/Off) button once, panel lights will flash and power will completely shut off after 30 seconds.

OR

Press Power Control (On/Off) button twice, and all power will be completely shut immediately.

If only the lights are on, pressing Power Control (On/Off) button once will turn off after 30 seconds.

8

Page 10
Image 10
Kobe Range Hoods RA9436SQF, RA943SQB installation instructions Operation Instructions, Turn on, Turn OFF