Scanner Settings Dialog Box
Buttons in the Scanner Settings Dialog Box
OK
Default
Cancel
Area
More
This section describes the features and buttons in the Scanner Settings dialog box.
The Scanner Settings dialog box shown below appears when either the Scanner 1500 or the Scanner 2500 is selected in the Scanner list.
Version information for the driver and scanner appear on the left side of the Scanner Settings dialog box.
Following are descriptions of the buttons in the Scanner Settings dialog box.
Click on the OK button to accept all of the selections.
Click on the Default button to return all settings to their predetermined factory settings.
Click on the Cancel button to close the dialog box without saving any changes.
Click on the Area button to access the Set Scanning Area dialog box.
Click on the More button to access the Kodak Scanner Special Features dialog box. Refer to the section entitled “Kodak Scanner Special Features Dialog Box.”
6 |