9.Set the barcode area:

∙X-Position to Begin Search—must be 10 mm (0.39 inches) to the left of the first barcode data to be read.

∙Y-Position to Begin Search—the length from the top of the document to the upper edge of the barcode.

∙Width of area on page to search—set this value 20 mm

(0.79 inches) greater than the actual width of the barcode.

∙Length of area on page to search—set this value equal to the entire barcode search length. If the search area is large (e.g., an 8.5 x 11-inch region) then the scanning time will increase considerably.

Width

X coordinate

10 mm

10 mm

ulx

uly Y coordinate

Length (>10 mm)

Document

A-63055 December 1999

30