The Manual Feed Modes group box allows you to configure the feeder in different ways, from a manual feed mode so you can scan pages one by one, to a mode where you only have to place paper in the feeder to begin scanning.
Choose a manual feed mode:
∙Off— Manual Feed is off.
∙On—you can insert documents one by one. Insertion of a document starts scanning.
∙Auto Start—when documents are placed in the feed tray, scanning starts automatically. When scanning is finished, the scanner waits for more documents. Scanning starts again after you place more documents in the feed tray.
∙Wait Until User Pushes Key—place documents in the feed tray and press the scanner’s Stop/Start button to start scanning. When scanning is finished, the scanner waits for more documents. Scanning starts again after you place more documents in the feed tray and press the scanner’s Stop/Start button.
Manual Timeout(s)—when you enable a Manual Feed mode, Manual Timeout(s) is also enabled. You can specify a time delay setting from 1–300 seconds. The default is 300 seconds (5 minutes). If a document is not fed manually within the specified time, the scanner returns to automatic feeding mode.
The Dither and Gamma buttons in the Download From File group box allow you to access dither and gamma files.
