Specifying an Area

To capture a portion of an image, click on the Sub Area button in the

 

Front Side Settings group box or in the Back Side Settings group box

 

to access the Sub Area dialog box.

NOTE: The Sub Area dialog box shown above appears for the Scanner 1500. The Sub Area dialog box shown below appears for the Scanner 2500.

Area settings are determined by the X and Y positions and the width and length coordinates. Set the scanning area in the Area group box on the basis of the size specified in the Paper Size drop-down list box. You can also use the mouse to define the scanning area in the window.

A-63055 December 1999

50