When Stop at Skew is enabled, the scanner stops scanning when a skewed document is detected.
NOTE: This feature is available only on the Scanner 1500.
Manual Feed allows you to configure the feeder in different ways, from a manual feed mode so you can scan pages one by one, to a mode where you only have to place paper in the feeder to begin scanning.
Check the Enable box and choose a Manual Feed mode:
∙All Pages—when documents are placed in the feed tray, scanning starts automatically. When scanning is finished, the scanner waits for more documents. Scanning starts again after you place more documents in the feed tray.
∙All Pages and Wait till user pushes key—place documents in the feed tray and press the scanner’s Stop/Start button to start scanning. When scanning is finished, the scanner waits for more documents. Scanning starts again after you place more documents in the feed tray and press the scanner’s Stop/Start button.
∙1 Page—you can insert documents one by one. Insertion of a document starts scanning.
Manual Timeout—when you enable Manual Feed, Manual Timeout is also enabled. You can specify a time delay setting from 1–300 seconds. The default is 300 seconds (5 minutes). If a document is not fed manually within the specified time, the scanner returns to automatic feeding mode.
