6www.kodak.com/go/aiosupport
2
Networking Your Printer
This section explains how to configure or change your wireless network settings.

Connecting to a wireless network

To connect your printer to an 802.11b/g/n wireless (Wi-Fi) network, use the
following procedures.

Before you connect

You need:
• a wirele ss router.
• to determine whether your wireless router supports Wi-Fi Protected Setup
(WPS).
NOTE: If you have specific questions about your router, see your router
manufacturer’s documentation for more information.

Connecting to a wireless network using the Wi-Fi Setup Wizard

You can use the Wi-Fi Setup Wizard on the printer to connect to your wireless
network. Use the procedures that is appropriate for your network setup.
Connecting to a non-WPS wireless router
To connect your printer to your wireless network, you need to know the network
name, also called the Service Set Identifier (SSID). You can obtain your network
name from the wireless router. See the manufacturer's documentation for more
information.
If you have enabled security on your network, you also need to know the security
string (passphrase or password), which may be a Wired Equivalent Privacy (WEP)
or a Wi-Fi Protected Access (WPA/WPA2) passphrase.
Record your network information using the correct uppercase and lowercase letters.
Network Name (SSID): _____________ __________________________
Security String (case-sensitive): ________________________________
1. Press .
2. Press to select Network Settings, then press OK.
3. With Wi-Fi Setup Wizar d selected, press OK.
NOTE: The Wi-Fi radio turns on when you select Wi-Fi Setup Wizard.