www.kodak.com/go/aiosupport 46
KODAK HERO 2.2 All-in-One Printer
Printing from a memory card
You can print pictures from the following cards:
•SD Card
• SDHC Card
• MMC Card
• MEMORY STICK
• Variations of the memory cards listed above that require an adapter (for
example, MEMORY STICK Duo, miniSD, and microSD)
IMPORTANT: If you use a memory card with an adap ter, make sure you insert and re move
the adapter and the memory card as a unit; do not remove the memory card
while leaving the adapter in the printer.

Using default settings to print a picture

Unless you change the default settings, the default for printing pictures is one
4 x 6 in. / 10 x 15 cm picture. (To change the default settings, see Save as Defaults at
the bottom of the table under Changing the settings and printing pictures, page47.)
1. Insert the memory card into the memory card slot.
2. Press or , then press OK to select the picture(s) you want to print.
3. Press .
The printer prints a single 4 x 6 in. / 10 x 15 cm picture.
IMPORTANT: To prevent loss of data from your memory card, camera, or portable drive,
do not remove it from the printer while printing.
memory card slot