Kodak 6805 manual Software is unable to

Models: 6805

1 56
Download 56 pages 57 Kb
Page 33
Image 33

Calibrating the Printer

Error Message

Description or Cause

 

Possible Solution

 

 

 

 

 

 

 

 

Cannot open the USB port.

The software is unable to

Check that the printer cables are secure.

Please check the printer

communicate with the printer.

Check that the printer is turned on and the

cables and power.

 

 

operator panel Ready light is illuminated.

 

 

Power the printer off then on.

 

 

Reboot your computer.

 

 

 

Cannot access the file or read

A file required by the calibration

Uninstall then reinstall the calibration

the data.

software is missing or corrupt.

software. See “Installing the Calibration

 

 

Software” on page 3-1.

 

 

 

 

Parameter error, such as

An internal error has occurred within

Close the calibration software and try

undefined tag or insufficient

the calibration software.

 

calibrating the printer again.

data.

 

Uninstall then reinstall the calibration

 

 

 

software. See “Installing the Calibration

 

 

 

Software” on page 3-1.

 

 

Check the KODAK web site for an updated

 

 

 

version of the calibration software.

 

 

 

 

The printer with the selected

The calibration software is unable to

Close the calibration software.

ID number cannot be found.

find the printer with the selected

Check that the printer cables are secure.

 

Printer ID.

• Check that the printer is turned on and the

 

 

 

 

 

operator panel Ready light is illuminated.

 

 

Run the calibration software and try

 

 

 

choosing the printer again.

 

 

 

 

The printer is not ready.

The printer is not ready for

Check that the printer cables are secure.

 

calibration.

Check that the printer is turned on and the

 

 

 

operator panel Ready light is illuminated.

 

 

 

 

The printer is busy.

The printer is not ready for

Wait a few minutes until the operator

 

calibration.

 

panel Ready light is illuminated.

 

 

If this message continues to occur, power

 

 

 

the printer off and then on.

 

 

 

 

The ribbon is advancing.

The printer is not ready for

Wait a few minutes until the operator

 

calibration.

 

panel Ready light is illuminated.

 

 

If this message continues to occur, power

 

 

 

the printer off and then on.

 

 

 

 

The operator panel is in use.

The printer is not ready for

Wait a few minutes until the operator

 

calibration.

 

panel Ready light is illuminated.

 

 

If this message continues to occur, power

 

 

 

the printer off and then on.

 

 

 

 

3-9

Page 33
Image 33
Kodak 6805 manual Software is unable to