Kodak 6805 manual Jam on

Calibrating the Printer

Error Message	Description or Cause		Possible Solution
The printer is initializing.	The printer is not ready for	• Wait a few minutes until the operator
	calibration.		panel Ready light is illuminated.
		•	If this message continues to occur, power
			the printer off and then on.
Paper error.	The paper is empty or not loaded.	Load the paper. See “Loading the Paper” on
		page 1-8.
Paper empty.	The paper is empty.	Reload the paper. See “Loading the Paper”
		on page 1-8.
Ribbon empty.	The ribbon is empty.	Reload the ribbon. See “Loading the Ribbon”
		on page 1-5.
Paper jam.	The paper is stuck in the printer or	Clear the paper jam. See “Clearing a Paper
	paper path.	Jam” on page 6-3.
Cover open.	The upper cover is open or not	Close the upper cover by pressing on the
	latched.	center of the cover until it clicks.
Printer error: 2500. Please	_	Contact your KODAK representative for
call for service.		service. Have available:
		•	the error code number
		•	the printer model number and serial
			number (listed on the printer data plate)
Printer error 2504. Please call	_	Contact your KODAK representative for
for service.		service. Have available:
		•	the error code number
		•	the printer model number and serial
			number (listed on the printer data plate)
USB communication error.	The software is unable to	• Check the USB cable connection.
	communicate with the printer.	• Replace the USB cable.
		•	Try using a different USB port on the
			computer.
		•	If the printer is connected through a USB
			hub, try connecting directly to the
			computer.

3-10