Troubleshooting

 

Status

Solution

 

You cannot take a

Turn the camera off, then on again.

 

picture

Depress the Shutter button all the way (see page 4).

 

 

Insert new/charged batteries in the correct orientation (see

 

 

page 1).

 

 

When inserting a memory card, push it in until it clicks (see

 

 

page 3).

 

 

Memory is full. Transfer pictures to the computer (see page 34),

 

 

delete pictures (see page 18), or insert another card.

 

Memory card not

Use a card reader to check the card on a computer. If it’s

 

recognized or camera

corrupted, format the card in the camera (see page 33).

 

freezes with card

Try another SD or SDHC Card.

 

Cannot find the

To view pictures on a card or in internal memory, see page 17.

 

desired picture/video

 

 

 

Computer/connectivity problems

 

 

 

 

Status

Solution

 

 

 

Slide Show does not run on an external video device

Adjust the camera Video Out setting to NTSC or PAL (see page 32).

Make sure the external device settings are correct. (See the device’s user guide).

Computer does not communicate with the camera

Turn off the camera, then turn it back on.

Make sure the battery is charged and installed correctly (see page 1).

Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is connected to the camera and the computer (see page 34). Then turn on the camera.

See KODAK Software Help at www.kodak.com/go/camerasw.

40

www.kodak.com/go/support

Page 46
Image 46
Kodak 1845346, 8407B001, 8561326, C142 manual Computer/connectivity problems, Memory card not