38 www.kodak.com/go/support
Troubleshooting
Picture quality problems
Status Solution
Picture is not clear ■Clean the lens (see page42).
■Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■Use a larger picture size (see page27).
■If you’re manually adjusting the ISO speed, realize that high ISO
setting may cause grainy pictures (see page28).
Picture is too dark ■Reposition the camera for more available light.
■Use Fill flash (see page8) in Program mode, Backlight in SCN mode,
or change your position so light is not behind the subject.
■Move so that the distance between you and the subject is within the
effective flash range. (See Specifications, page40.)
■In Program mode, increase the Exposure Compensation (see
page28).
Picture is too light ■Reposition the camera to reduce the amount of available light.
■Turn off the flash (see page8).
■Move so that the distance between you and the subject is within the
effective flash range (see Specifications, page40).
■In Program mode, decrease the Exposure Compensation (see
page28).