Troubleshooting
www.kodak.com/go/support 43Flash does not fire ■Check the flash setting and change as needed (pag e 26).
NOTE: The flash does not fire in all modes.
Storage location is
almost or entirely full
■Transfer pictures to the computer (page16).
■Delete pictures from the card or insert a new one (pag e 13).
■Change image storage location to internal memory (page 31).
Battery life is short ■Make sure the correct battery type is loaded (page 1).
■Wipe the co ntacts w ith a cle an, dry cloth (page 57) before inserting
a battery in the camera.
■Insert a new or charged battery (page 1).
You cannot take a
picture
■Turn the camera off, then on again. Make sure the camera is not in
Favorites mode.
■Depress shutter button completely down (page 4).
■Insert a new or charged battery (page 1).
■Wait until the Ready light glows green before attempt ing to take
another picture.
■Memory full. Transfer pictures to the computer (page 16), delete
pictures from the camera (page 13), change image storage
location, or insert a new card.
Error message
appears on LCD
screen
■Turn the camera off.
■Remove memory card from the camera.
■Remove the battery and wipe the contacts with a cle an, dry cloth
(page57 ).
■Insert a new or charged battery (page 1).
■Turn on the camera.
■If all else fails, get customer support help (page 48).
Memory card not
recognized or camera
freezes with card.
■Card may be corrupted. Format card in camera (page 33).
■Use another memory card.
If... Try one or more of the following