40 www.kodak.com/go/support
Troubleshooting
Camera/computer communications
Ready light blinks
green.
■Camera is operating normally.
Ready light blinks
amber.
■Wait. Resume picture taking when the light stops bli nking and turns
green.
Ready light blinks
red and camera
turns off.
■Install new batteries (page 1) or charge rechargeable batte ries.
Ready light glows
steady red.
■Transfer pictures to the computer (page13), delete pictures from the
camera (page11), switch image storage locations (page21 ), or insert
a card with available memory (page3).
■Wait. Resume picture taking when the light turns gre en.
■Change the image storage location to internal memory (page 21), or
use a different card.
Ready light glows
steady green.
■Camera is operating normally.
If... Try one or more of the following
The computer does
not communicate
with the camera.
■Visit www.kodak.com/go/c633support.
■Turn on the camera (page2).
■Install new batteries (page 1) or charge rechargeable batte ries.
■Connect cable to camera and computer port (page 13).
■Install the software (page12).
■Disconnect the USB cable. Close all open application s. Re-install the
software (page12).
■Disconnect camera from the computer. Close all software applications,
reconnect camera.
If... Try one or more of the following