Setting the language
US English is initially set into the memory of this camera, but you can select another language (12 options available). See the table on page 7 for the List of languages and the LCD (Liquid Crystal Display) abbreviated codes.
1.Completely lift up the lens cover/
flash (4) to uncover the lens (8) and to turn on the camera.
2.Press and hold the menu button (23) for approximately 4 seconds until US appears on the LCD panel (14).
MENU SELECT ENTER |
•When you release the button, the language code “blinks.”
3.Press the right or left side of the zoom dial (2) or the select button (22)
to cycle to your selection.
6
