UNLOADING THE FILM

Automatic rewind

The camera automatically rewinds the film into the cassette after the last picture is taken.

1.Wait for the camera motor to stop to ensure that the film is completely rewound into the film cassette.

The LCD PANEL (15) displays “FILM REWINDING” and the FRAME COUNTER (24) counts down to “0.”

When the film is fully rewound, the LCD panel indicates “REMOVE FILM.”

2.Turn the camera upside down and slide the FILM-DOOR LATCH (23) to open the FILM DOOR (20).

3.Remove the film cassette from the camera and reload with new KODAK ADVANTIX Film.

The Film Status Indicator (FSI) on the film cassette is at and the LCD panel displays “E.”

28

Mid-roll change (MRC)

You can remove your film in mid-roll and later reload it and continue picture- taking. The Film Status Indicator (FSI) on a partially exposed film cassette is set to (#2 position). When you reload the film cassette into the camera,

SEARCHING” appears on the LCD panel. The camera automatically advances the film to the first unexposed frame and “FRESH FILM” appears on the LCD panel. Film can be rewound and reloaded until the last picture is taken. The camera automatically rewinds the film and sets the FSI to (#3 position) when the last picture is taken.

1.Open the CONTROL-PANEL COVER (18)

located below the LCD PANEL (15).

2.Gently press the MID-ROLL-CHANGE BUTTON (38) with the control-button activator on the camera strap to start the auto-film rewind.

TITLE

PRINT

DATE

SELECT

ENTER

Page 33
Image 33
Kodak C800 manual Unloading the Film, Automatic rewind