36 www.kodak.com/go/support
Troubleshooting
Troubleshooting

Camera problems

Status Solution
Camera does not
turn on
Make sure the battery is charged and installed correctly (see
page1).
Camera does not turn
off
Camera buttons and
controls do not
function
LCD is too dark. Adjust the LCD Brightness setting (see page30).
Pictures remaining
number does not
decrease after taking a
picture
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
Flash does not fire Check the flash setting, and change as needed (see page8).

NOTE: The flash does not fire in all modes.

Memory card is almost
or entirely full
Transfer the pictures to the computer (see page32).
Delete pictures from the card (see page18) or insert a new card.
Memory card not
recognized or camera
freezes with card
Card may be corrupted. Format the card in the camera (see
page31).
Use another memory card. Only SD or SDHC Cards are supported.
Battery life is short Verify that the correct battery type is installed (see page44).
Wipe the battery contacts with a clean, dry cloth before inserting
it in the camera.
Insert a new/charged battery (see page1).
Limit the time you review pictures/videos on the camera LCD.
Purchase batteries at www.kodak.com/go/accessories.