Kodak CD33 manual Camera ready light status

Troubleshooting

Camera ready light status

If...	Try one or more of the following
Ready light does	■ Turn on the camera (page 2).
not turn on and the	■ Recharge the battery or install a new one (page 1).
camera does not	■ Mode dial was on when battery was reloaded. Turn Mode dial off, then
work	back on.
Ready light blinks	■ Picture is being processed and saved to the camera. Camera is
green	operating normally.
	■ Camera is connected. Camera is operating normally.
Ready light blinks	■ Recharge the battery or install a new one (page 1).
red and camera
turns off
Ready light glows	■ Shutter button is pressed halfway down. Focus and exposure are set.
steady green	Camera is operating normally.
Ready light glows	■ The Mode dial is set to Favorites. Camera is operating normally.
steady orange
Ready light blinks	■ Flash is not charged. Wait. Resume picture-taking when the light stops
orange	blinking and turns off.
	■ Auto exposure or auto-focus are not set. Release the Shutter button
	and recompose the picture.
Ready light glows	■ Camera’s internal memory or card is full. Transfer pictures to the
steady red	computer (page 15), delete pictures from camera (page 13), switch
	image storage locations (page 30), or insert card with available
	memory (page 3).
	■ Camera processing memory is full. Wait. Resume picture-taking when
	the light turns off.
	■ Card is read-only. Change image storage location to internal memory
	(page 30), or use a different card.

46 www.kodak.com/go/support