Kodak CD44 Computer/connectivity problems, Direct printing Pictbridge enabled Printer problems

Troubleshooting

	Status	Solution
	You cannot take a	■ Turn the camera off, then on again.
	picture	■ Depress the Shutter button all the way (see page 4).
		■ Insert new/charged batteries in the correct orientation (see
		page 1).
		■ When inserting a memory card, push it in until it clicks (see
		page 3).
		■ Memory is full. Transfer pictures to the computer (see page 36),
		delete pictures (see page 20), or insert another card.
	Memory card not	■ Use a card reader to check the card on a computer. If it’s
	recognized or camera	corrupted, format the card in the camera (see page 35).
	freezes with card	■ Try another SD or SDHC Card.
Computer/connectivity problems
	Status	Solution

Slide Show does not run on an external video device

■Adjust the camera Video Out setting to NTSC or PAL (see page 34).

■Make sure the external device settings are correct. (See the device’s user guide).

Computer does not communicate with the camera

■Turn off the camera, then turn it back on.

■Make sure fresh batteries are installed correctly (see page 1).

■Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is connected to the camera and the computer (see page 36). Then turn on the camera.

■See KODAK Software Help at www.kodak.com/go/camerasw.

Direct printing (PICTBRIDGE enabled Printer) problems

Status	Solution
Cannot print to a	■ In the Setup menu, change the Computer Connection setting to
PICTBRIDGE Printer	Other Application (see page 34).

42 www.kodak.com/go/support