Kodak CIS-201 specifications More Information

Printer Conversion to KODAK EKTACOLOR Edge 8 and EKTACOLOR ROYAL VIII Papers

Converting to the New Paper

To make new reference prints:

1.	Load 4-inch Edge 8/ROYAL VIII Paper.
2.	Change the aim: SETUP/PRINTER/MASTER/EDIT.
	In the second screen, change the aim values to these new
	values:
	Y	M	C
	1.0	1.0	0.9
3.	Change deltas to zero, as above: SETUP/PRINTER/
	MASTER/EDIT. In the third screen, change all delta
	values to zero.
4.	Press TEST/PRINTER/EXPOSE. MEASURE/Ð,
	UPDATE/Ð. Repeat the test until it passes.
5.	Print the full “test film set” of negatives on the new
	paper: SETUP/PRINTER/PAPER/FULL PAPER
	TEST/EXPOSE. Make sure the paper channel with “**”
	is highlighted; this designates the master channel.
6.	Read all the prints in the same order in which they were
	exposed: MEASURE.
7.	If the test is “Not OK,” repeat Steps 5 and 6.

Make some test prints from customer negatives. If you need to customize production, start by entering the delta values you noted previously for Edge 7/ROYAL VII Paper production. Then adjust those values (SETUP/PRINTER/ MASTER/EDIT, screen 3) based on visual assessment.

To track other paper widths with the 4-inch reference paper:

1.Select the paper channel that will convert to Edge 8/ ROYAL VIII Paper.

2.To track with the “reference paper,” press SETUP/ PRINTER/PAPER/EDIT; scroll down to screen 2. “Reference Paper” should show “4" Gloss.” If it does not, press the “Reference Paper” button and select “4" paper.” Confirm with Ð.

If you are not converting all paper widths to EKTACOLOR Edge 8/ROYAL VIII Paper at one time:

1.Load the paper size that will continue to use Edge 7/ ROYAL VII Paper.

2.Run a paper balance test: TEST/ PAPER/ EMULSION/ EXPOSE. Repeat this test until it passes.

Note: These test patches will appear pink, not neutral. This is correct.

3.Enter the manual delta correction values below: SETUP/ PRINTER/PAPER/EDIT. Highlight the paper size to be edited.

Y	M	C
-0.02	-0.06	+0.02

Note: When entering deltas, note that 1.0 is equivalent to 10 color buttons, i.e., 0.1 = 1 color button.

Make test prints from customer negatives. If you need to customize production, adjust the delta values (SETUP/ PRINTER/PAPER/EDIT) based on visual assessment.

MORE INFORMATION

Kodak has many publications to assist you with information on Kodak products, equipment, and materials.

Additional information is available on the Kodak website and through the U.S.A./Canada faxback system.

The following publications are available from dealers who sell Kodak products, or you can contact Kodak in your country for more information.

For the latest version of technical support publications for

KODAK Products, visit Kodak on-line at:

http://www.kodak.com

Many technical support publications for KODAK

Products can be sent to your fax machine from the Kodak Information Center. Call:

U.S. 1-800-242-2424, Ext. 33 / Canada 1-800-295-5531

—Available 24 hours a day, 7 days a week—

If you have questions about KODAK Products, call Kodak. In the U.S.A.:

1-800-242-2424, Monday–Friday

9 a.m.–7 p.m. (Eastern time) In Canada:

1-800-465-6325, Monday–Friday

8 a.m.–5 p.m. (Eastern time)

Consumer Imaging

EASTMAN KODAK COMPANY • ROCHESTER, NY 14650

Printer Conversion to KODAK	Kodak, Ektacolor, and Royal	Minor Revision 3-00
EKTACOLOR Edge 8 and	are trademarks.	Printed in U.S.A.
EKTACOLOR ROYAL VIII Papers