30

Chapter 3

Turning On Loop

When you turn on Loop, the slide show is continuously repeated.
1On the Slide Show menu, press to
scroll down to Loop; highlight Loop, then
press the OK button.
2Highlight On, then press the OK button.
When you start a slide show, it repeats
continuously until you cancel it by
pressing the OK button or until battery
power is exhausted.
The Loop setting remains until you
change it.
Displaying Pictures on a Television
You can run a slide show or display your pictures on a television, computer
monitor, or digital projector (any device equipped with a video input).
NOTE: Ensure that the Video Out setting is correctly set to NTSC or PAL (see
page40).
1Connect the video cable from the video out
port on the camera to the video in port on
the television. (Refer to your television
Users Guide for details on video in setup.)
The camera LCD turns off; the television
screen acts as the camera display.
2You can now use the television screen to
review your pictures in single or multiple
views, run a slide show, or do anything on
the television screen that you can do on the
camera LCD.
Video out
port