Kodak CX7310 File format is, Unrecognized, A picture, Turn on the camera, Not work, Blinking red

Troubleshooting

Problem	Cause	Solution
In Review mode, a	File format is	Transfer the picture to the computer
blue or black screen	unrecognized.	(page 28).
is displayed instead
of a picture.
Shutter button does	Camera is not turned on.	Turn on the camera (page 4).
not work.
	Camera is processing a	Wait until the ready light stops
	picture; the ready light	blinking red before attempting to take
	(near the viewfinder) is	another picture.
	blinking red.
	Card or internal memory	Transfer pictures to the computer
	is full.	(page 28), delete pictures from the
		camera (page 18), switch image
		storage locations (page 13), or insert
		a card with available memory
		(page 7).
	Shutter button was not	For best pictures, see page 8.
	pressed.
Slide show does not	Video Out setting is	Adjust the camera Video Out setting
run on external	incorrect.	(NTSC or PAL, page 15).
video device.
	External device is set	See the external device’s user’s guide.
	incorrectly.
Picture is too light.	Subject was too close for	Move so there is at least 2.6 ft (0.8 m)
	flash.	between camera and subject.
	Too much light.	Decrease Exposure Compensation
		(page 12).
Picture is not clear.	Lens is dirty.	Clean the lens (page 40).
	Subject too close when	Move so there is at least 2.6 ft (0.8 m)
	taking picture.	between the camera and the subject.
	Subject or the camera	Place the camera on a flat, steady
	moved while the picture	surface or use a tripod.
	was taken.

31 www.kodak.com/go/support