Manuals / Brands / Photography / Digital Camera / Kodak / Photography / Digital Camera

Kodak DC40 Connecting to a Computer Running, WINDOWS Software

1 58

Download 58 pages, 272.64 Kb

Connecting to a Computer Running

WINDOWS Software

Your personal computer contains either a 9-pin or a 25-pin serial port. The cable supplied with the DC40 camera uses a 9-pin connector, therefore, you will need to use the adapter provided with the camera if you want to use a 25-pin serial port.

IMPORTANT: Use only the cable provided with the DC40 camera.

1.Turn off the camera by sliding the lens cover switch to the OFF position.

2.Attach the 9-pin adapter to the 25-pin port IF your personal computer uses a 25-pin serial port.

3.Plug the matching end of the cable into the serial port or adapter on the back of your computer.

4.Tighten the connector's thumbscrews.

5.Lift the rubber tab to uncover the camera's serial port.

6.Plug the unused end of the cable into the camera's serial port after carefully lining up the notches.

January 1996

Contents

Page Contents Page Page Introduction About the Kodak Digital Science(TM) DC40 camera Features 1 Getting Started Checking Package Contents Parts of the Camera Front Back Installing the Batteries Page Page Turning the Camera On and Off 2 Using the Camera Accessing Controls Moving Between Features Making Feature Selections Setting the Flash Flash Setting Descriptions Flash Off To turn off the flash: Flash On To turn on the flash: Setting the Timer Timer Setting Descriptions Ten Seconds To set the timer to ten seconds: Twenty Seconds To set the timer to twenty seconds: Setting the Exposure To make an exposure selection: Waking the Camera Taking Pictures Page Managing Pictures Storing Pictures Erasing Pictures Erasing the Last Picture Erasing All Pictures To erase all stored pictures: 3 Using Batteries Battery Charge Level Battery Safety Information Improving Battery Performance About NiCad Batteries 4 Using a Power Adapter To use a power adapter: 5 Connecting to a Computer Connecting to a MACINTOSH Computer Page Connecting to a Computer Running WINDOWS Software 6 Maintenance General Guidelines Cleaning the Lens Cleaning the Light Sensors Storing the Camera 7 Troubleshooting Problems and Solutions Display Does Not Appear Part of a Picture Is Missing Picture Is Not Clear Nothing Happens when Shutter Is Pressed Flash Does Not Work Picture Is Too Light Picture Is Too Dark Getting Help Appendix A Camera Specifications Technical Size Weight Power Sources Power Consumption Regulatory Information FCC Compliance and Advisory Statement Canadian DOC Statement Index