7 Troubleshooting

This chapter should help you resolve any problems you may encounter with your DC40 camera. If you cannot resolve a problem after reading through this information, refer to the ™Getting Help￿ section at the end of this chapter.

Problems and Solutions

 

Display Does Not Appear

 

 

 

 

 

 

Cause

 

Solution

 

 

 

 

 

The camera is not on.

 

Open the lens cover.

 

 

 

 

 

The camera is asleep.

 

Press the shutter button or the

 

 

 

Feature or Select button

 

 

 

 

 

The batteries are low,

 

Replace the batteries or use a

 

dead, or not installed.

 

power adapter.

 

 

 

 

 

The batteries are not

 

Reinstall the batteries following the

 

installed correctly.

 

instructions in Chapter 1.

 

 

 

 

 

The power adapter was

 

Plug the power adapter back in to the

 

disconnected from the

 

camera, turn the camera on and then

 

camera while the camera

 

off again, and then disconnect the

 

was still turned on.

 

power adapter from it.

 

 

 

 

36

January 1996