Connection Section
Portrait (shorter side at the top)
�
�
�
�
�
�
�
Left side view
③USB upstream port
Connect this port to the upstream connector from the computer. For the connection, use a USB cable 2 meters or shorter in length.
④USB downstream port x 2
Connect the ports to USB devices (a MOUSE, etc.) with a maximum current consumption of no greater than 100mA per port.
Connect the color sensor when you operate color calibration.
⑤DC power connector (DC IN 12V)
Connect the attached AC power adapter to the +12VDC power source connector.
⑥VIDEO input connector (SIGNAL)
Connect a signal cable to the graphics board's digital video signal (DVI) connector.
⑦REMOTE IN connector ⑧ REMOTE OUT connector
Used to control serial communication for such as brightness calibration.
⑨Photo sensor connector This connector is not used.
Caution
The ③ and ④ USB hubs are
- 10 -