Others
Remote Control Preparation
INSERT BATTERIESUSING THE REMOTE CONTROL
1 | Open the cover. | Point the remote control at the remote sensor. |
| ||
|
| |
|
| (The pictures below are for reference only). |
2 | Insert batteries. |
|
30º 30º
Make sure to match the "+" and
3 | Close the cover. |
|
Notes:
Improper use of batteries may cause battery leakage and corrosion. To operate the remote control correctly,follow the instructions below:
Do not insert the batteries in the wrong direction.
Do not charge, heat, open, or
Do not throw batteries into a fire.
Do not leave dead batteries in the Remote Control.
Do not use different types of batteries together, or mix old and new batteries.
If you do not use the remote control for a long period of time, remove the batteries to avoid possible damage from battery corrosion.
If the remote control does not function correctly or the operating range becomes reduced, replace all batteries with new ones.
If battery leakage occurs, clean the battery compart- ment, then insert new ones.
Remarks:
Do not expose the remote sensor of the DVD Player to a strong light source, such as direct sunlight.
Notes:
Point the remote control directly at the player's remote sensor.
Do not leave the remote control in an extremely hot or humid place.
Do not spill water or put anything wet on the remote control.
Battery life is 1 year under normal conditions.
34
