AAM Loop Antenna
Connection
Connect the supplied loop antenna to the AM ANTENNA terminal. Place the AM loop antenna far away from the system and adjust its position for the best reception.
BFM Wire Antenna
Connection
Connect the supplied FM wire antenna to the FM ANTENNA 75 Ω terminal. Adjust the position of the FM antenna for the best reception.
Outdoor Antenna
For better FM stereo reception connect an outdoor FM antenna to the FM ANTENNA 75 Ω terminal using a 75 Ω coaxial wire.
CSpeakers Connection
•Connect the right speaker to Front terminal R, with the colored wire to + and the black wire to
•Connect the left speaker to Front terminal L, with the colored wire to + and the black wire to
•Clip the stripped portion of the speaker wire as shown.
12 mm
unlock | lock |
CAUTION:
–For optimal sound performance, it is recommended to use the supplied speakers.
–Do not connect more than one speaker to any one pair of
–Do not connect speakers with impedance lower than the speakers supplied. Please refer to SPECIFICATION section of this manual.
DLine Out Connection (wireless
ready)
You can connect the audio left and right LINE OUT terminals to a optional CD Recorder ANALOG IN terminals. This allows you to record in an analogue format.
You can also install additional optional front active speakers away from the system (e.g. in another room) to reduce the inconvenience of running long speaker wires across rooms. You can place as many remote speakers as you like provided they operate at the same radio frequency. Connect the wireless radio frequency transmitter to the LINE OUT terminals. Place the active speakers at your preferred location. Be sure to follow the instructions supplied with the active speakers.
Note:
–Availability of wireless transmitter and its peripherals are subjected to the approval of local authorities. Please check with respective local safety or approving authority.
EConnecting other
equipment to your system
You can connect the audio left and right OUT terminals of a TV, VCR, Laser Disc player, DVD player or CD Recorder to the AUX/CDR IN terminals at the rear of the system.
FSubwoofer Out Connection
Connect the optional active subwoofer to the SUBWOOFER OUT terminal. The subwoofer reproduces just the low bass sound effect (e.g. explosions, the rumble of spaceships, etc.). Be sure to follow the instructions supplied with the subwoofer.
GAC Power Supply
After all other connections have been made, connect the AC power cord to the system and to the wall outlet.
PREPARATION
Inserting batteries into the | English |
Remote Control |
•Insert the batteries (Type R06 or AA) into the remote control as shown in the battery compartment.
•To avoid damage from possible battery leakage, remove dead batteries or batteries that will not be used for a long time. For replacement, use type R06 or AA batteries.
7
7 | 12/8/00, 1:57 PM |
3139 115 20071
