Recording from other sources
(only on tape deck 2)
1Press TAPE ( TAPE 1•2 ) to select tape deck 2.
2Load a blank tape into tape deck 2 with the open side downward.
3Press íor ëto select the recording tape side (see Tape Side under TAPE section).
4Press CD, TUNER or AUX.
•Start playback of the selected source.
5 Press REC to start recording.
™The REC starts flashing.
6Press Çto stop recording.
Notes:
–Only å or ∂ mode is available during recording .
–During recording, it is not possible to listen to another source.
Dubbing tapes (from tape deck 1 to tape deck 2)
1Press TAPE ( TAPE 1•2 ) to select tape deck 2.
2Load the prerecorded tape into tape deck 1 with full spool to the left and a blank tape into tape deck 2 with full spool aside.
3Press íor ëto select the recording tape side (see Tape Side under TAPE section).
4Press DUB (HSD) once for normal speed dubbing or twice (within 2 seconds) for high speed dubbing.
™"NORMAL" (normal speed) or "FAST" (high speed) will be displayed, followed by "DUB" with "< or >" scrolling left or right depending on the tape side selected.
™The HSD appears on the display during high speed dubbing.
•Dubbing will start immediately. ™ The REC starts flashing.
5Press Çto stop dubbing.
Notes:
–Only å mode is available during dubbing.
–At the end of side A, flip the tapes to side B and repeat the procedure.
–Dubbing of tapes is only possible from tape deck 1 to tape deck 2.
–To ensure good dubbing, use tapes of the same length.
–During high speed dubbing in Tape mode, the sound is reduced to a low volume.
–You can listen to another source while dubbing.
CD/MP3-CD Synchro Start Recording
1Load a blank tape into tape deck 2 and a disc into a disc tray.
2Press CD to select
• You can program the tracks in the order you want them to be recorded (see Programming Tracks). If not, select the disc by pressing CD (CD 1•2•3) and the tracks are recorded according to the order on the selected disc.
3Press REC to start recording. ™ The REC starts flashing.
•Disc will start playback automatically.
4 Press Çto stop recording.
One Touch Recording
•For One Touch Recording, as soon as you press REC, the current source (CD, TUNER or AUX) will be recorded on tape deck 2.
1Load a blank tape in tape deck 2.
2Press REC to start recording. ™ The REC starts flashing.
3Press Çto stop recording.
Note:
–When you press RECORD while in TAPE mode, "SELECT SOURCE" will be displayed. One Touch Recording is not possible in TAPE mode.
RECORDING
English
21
21 | 12/8/00, 1:57 PM |
3139 115 20071
