Using the KODAK PROFESSIONAL READYLOAD Single-Sheet Packet
PROCESSING
To unload the film from the packet for processing, follow these steps:
Handle exposed film in total darkness. To avoid getting fingerprints on the film, wear cotton or nylon gloves when you unload it for processing.
1.Remove or tear the "Exposed" sticker.
2.Grasp both ends of the metal clip with one hand. Grasp the other end of the packet with your other hand. Tug gently to unseat the clip from the outer envelope. Pull the film assembly out of the outer envelope.
3.Hold the film assembly so that the base side is up. (The leader and trailer are attached to the base side of the film.) Peel away the trailer and clip.
4. Peel the leader away from the film.
Note: It is generally easier to peel the leader and trailer from the film rather than peel the film from the leader/ trailer.
Kodak, Kodak Professional, Ektachrome,
Portra, Readyload, and
Revised
Printed in U.S.A.
Using the KODAK PROFESSIONAL
READYLOAD
KODAK Publication No.
Film & Photofinishing Systems Group
5.Process the film as you normally do.
6.Save the cover envelope if you made notes on it.
MORE INFORMATION
Kodak has many publications to assist you with information on Kodak products, equipment, and materials.
Additional information is available on the Kodak website and through the U.S.A./Canada faxback system.
The following publications are available from Kodak Customer Service, from dealers who sell Kodak products, or you can contact Kodak in your country for more information.
For the latest version of technical support publications for KODAK PROFESSIONAL Products, visit Kodak
http://www.kodak.com/go/professional
If you have questions about KODAK PROFESSIONAL Products,
call Kodak.
In the U.S.A.:
9
In Canada:
8