Kodak III manual Maintenance, Lamp Tips

Maintenance

To ensure a long life and trouble-free operation for your projector:

•Allow the air to flow freely around the projector.

•Do not recirculate warm air.

•Keep the projector dust free.

•If your projector is chilled, bring it to room temperature before operating.

Projection Lamps Quartz-halogen 82 V projection lamps—

Included: EXR, 300 W (35-hour lamp life at full lamp/medium-brightness)

Sampling of other lamps:

EXY (200 hours/less brightness)

EXW (15 hours/maximum brightness)

FHS (70 hours/medium brightness)

Use combinations of lamp brightness, plus half- and full-lamp settings to approximate image brightness in multi-projector presentations.

Desired	EKTAGRPAHIC III
Brightness	Projector Lamp
Maximum	EXW
High	EXR
Medium	FHS
Low	EXY

Lamp Tips	• Projector operation on line voltages above 125 volts greatly
	reduces the lamp life.
	• Unplug the projector before changing the lamp.
	• Allow for unrestricted flow of air to the exhaust vent to prolong
	lamp life.
	• Gently wipe off any fingerprints with a soft cloth moistened with
	rubbing alcohol.

KODAK EKTAGRAPHIC III Slide Projector 21