Hoshizaki KMD-901MAH III. Cleaning and Maintenance, A. Cleaning and Sanitizing Instructions

Models: KMD-901MWH KMD-901MRH KMD-901MAH

1 27
Download 27 pages 21.83 Kb
Page 21
Image 21
III. Cleaning and Maintenance

III. Cleaning and Maintenance

IMPORTANT

Ensure all components, fasteners, and thumbscrews are securely in place after any cleaning or maintenance is done to the equipment.

A. Cleaning and Sanitizing Instructions

HOSHIZAKI recommends cleaning this icemaker at least once a year. More frequent cleaning, however, may be required in some existing water conditions.

WARNING

1.To prevent injury to individuals and damage to the icemaker, do not use ammonia type cleaners.

2.Always wear liquid-proof gloves to prevent the cleaning and sanitizing solutions from coming into contact with skin.

3.Carefully follow any instructions provided with the bottles of cleaning and sanitizing solution.

4.Never run the icemaker when the water tank is empty.

IMPORTANT

1.The cleaning valve is used to allow solution flow to the inside of the evaporator during the cleaning and sanitizing operation. It should be closed for all icemaking operation. The compressor will not operate unless this valve is completely closed.

2.To open the cleaning valve, the valve handle should be parallel to the valve body. To close the valve, the valve handle should be at a right angle to the valve body.

21

Page 21
Image 21
Hoshizaki KMD-901MAH, KMD-901MRH, KMD-901MWH III. Cleaning and Maintenance, A. Cleaning and Sanitizing Instructions