Install software, then share

Printing pictures

Direct printing with a KODAK All-in-One Printer

IMPORTANT: To print using PICTBRIDGE Technology, you must change the Computer Connection setting (in the Setup menu) to Other Application (see page 37).

You need a camera, a PICTBRIDGE enabled Printer, and a USB cable.

Connecting the camera to a KODAK All-in-One Printer

1Turn off the camera and printer.

2Connect the appropriate USB cable from the camera to the printer.

Printing from a KODAK All-in-One Printer

1Turn on the printer. Turn on the camera.

The PictBridge logo is displayed, followed by the current picture and menu. (If no pictures are found, a message is displayed.) If the menu turns off, press any button to redisplay it. If the printer sees the camera as a mass storage device, turn the camera off and then back on.

2Choose a printing option, then press OK.

Current Picture—Press to choose a picture.

Tagged Pictures—If your printer is capable, print pictures that you marked for printing.

Index Print—Print thumbnails of all pictures. (This option requires one or more sheets of paper.)

All Pictures—Print all pictures in internal memory or on a card.

NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer pictures to your computer, see page 39.

Purchase cables, accessories www.kodak.com/go/accessories

www.kodak.com/go/support

40

Page 47
Image 47
Kodak M22 Printing pictures, Direct printing with a Kodak All-in-One Printer, Printing from a Kodak All-in-One Printer